Installation is Easy!

Installation of your new fountain float kit is easy with simple tools. You can also contact us to arrange for a contractor to install the kit on your fountain. Once you get your fountain fill kit, it has great installation instructions included. You can even email us then for full installation steps and pictures.

Here's some sample pics from an installation:


Tools and material required for assembly (not included):

  • Electric/portable drill
  • Philips screwdriver tip for drill
  • End wrench 1/2"
  • End wrench 7/16"
  • Channel lock pliers
  • Phillips screw driver
  • Scissors
  • Black marker pen
  • Ruler
We recommend you purchase a can of spray paint that closely matches the color of your fountain, allowing you to paint the float valve assembly to make it less noticeable. Optionally, obtain a two-part waterproof, quick-setting epoxy if you wish to seal both drilled holes.
The fountain should be no more than half full and unplugged.

Before assembly, you may paint the fountain float assembly with spray paint.


Remember to wear safety glasses whenever operating power tools. When drilling into the side of a concrete fountain, do not push too hard on the drill bit, let it do the work for you.

Drilling into the fountain for tube insertion.


Water fill tube after insertion into the fountain base.

Installing the pressure reducer from your faucet to the fill tube.


Finished float kit working.

Enjoy Your Fully Automatic Fountain!

Creative Fountain Floats, Orangevale, CA  1-916-223-6266
Copyright 2013 Creative Fountain Floats, Patent Pending